 |
 |
 |
 |
|
|
|
|
 |
 |
 |
 |
 |
 |
||
 |
We propose a new system of multi-camera recording.
The new system is designed for a handheld camcorder and a shoulder type
camcorder to use as a studio camera under one multicore cable operation.
The system brings the Camera Adaptor DS-270/450 and the Base/Center Station
DS-550/850.
You can connect a camera adaptor and a base/center station via one multicore
cable.
Max. 100M
| Hyper limiter built-in for the phantom microphone input and the line input | |
| ■ | The Camera Adapter DS-450 is equipped with the hyper limiter function developed by PROTECH to prevents the excessive input from the audio output of a camcorder and supplies the right level of audio signal to the Base/Center Station DS-550/850. |
| 26-pin multicore cable | |
| ■ | Can use a common 26-pin multicore cable on hand represented by a Sony CCZ-A 25/50/100. |
| 4 kind of cables are available | |
| ■ | 25m/50m/75m/100m cable are available. The maximum cable length is 100m. |
| Electrical power supply |  |
|
| ■ | The Camera Adapter DS-270/450 can supply DC power in the combination with the Base/Centor Station DS-550/850. | |
| ■ | DS-450 supplies DC12V to a camcorder and DC power to a CamLight or Proma Prompter through the CamTap out of a camcorder. | |
| ■ | DS-270 can supply DC8.4V to a camera and DC power to a CamLight or Proma Prompter. | |
| Note: Power supply is available only when 26-pin multicore cable is used. When 15-pin multicore cable is used, the power can not be supplied. | ||
| Dual intecom function built-in (DS-850) | |
| ■ | Adopting the technology of PROTECH FD-300A, two headset connectors with the volume of a headphone and a microphone are equipped. |
| DS-270 Camera Adapter for a handheld camcorder | |
| ■ | Can be attached to a camcorder which has HD component output such as a small camcorder (Sony HVR-Z1/Z7 , etc). |
| ■ | Easy to attach or remove at the touch to the tripod under the combination
with the Tripod Base VST-14. |
| ■ |
Can supply DC power to a camera (some model is excluded.).
Twin tally display function, return and 8-pin/ LANC remote terminal are equipped.
CamLight terminal supplys DC power to DC light or PROTECH Proma Prompter |
HD-SDI / SD-SDI signal can be supplied to HD-SDI / SD-SDI switcher with
a coaxial cable.
When SDI switcher is used, return vodeo (analog composite) is not available
without optional SDI/analog conversion board or unit.
| ENG operation even with the Camera Adapter DS-450 can be allowed any time |
|
| ■ | Once plug a battery in the back of Camera Adapter DS-450 and removes multicore cable connector, a camcorder can be used again as a shoulder type camcorder. |
| Remote control | |
| ■ | The remote control of a camcorder is allowed by using a Sony Remote Control Unit RM-B150/B750. |
| Supports HD component. | |
| ■ | The system supports multi-camera recording in not only analog SD component and composite but analog HD component. |
| DS-450 Camera Adapter for an ENG camcorder | |
| ■ | Can be docked with a shoulder type camcorder which has HD component output such as a ENG HD camcorder (HVR-S270/PDW-F330.F355) |
| ■ | Two kinds of cable operation (26-pin or 15-pin multicore cable) is available to link with a base/center station. |
| ■ |
One multicore cable supports signals such as video, audio, gen-lock, intercom,
tally, return video. In case of 26-pin connections, it supplies DC power and camera remote control
signal to a camcorder.
|
| New 15-pin multicore cable | |
| ■ |
A new 15-pin multicore cable allows the low cost transmitting and receiving
of composite, intercom, gen-lock, tally and return video signals.
Note: Please use PROTECH 15-pin multicore cable to guarantee above features.
|
| 15-pin multicore cable | |
| ■ |
PROTECH prepares a new cable for multi-camera recording.
Low cost and light-weight is optimal to build a multi-core studio system
easily.
|
| VF Interface Unit | |
| ■ | A tally signal and a return video signal are monitored by using the VF
Interface Unit VIF-100 and Camera View Finder VF-43W. |
| ■ | In the VF interface unit use, it is possible to monitor with the viewfinder of a camcorder. |
| DS-550/850 Base/Center Station for DS-270/DS-450 Camera Adoptor. | |
| ■ | Connecting to the Camera Adapter DS-270/DS-450 via 26-pin cable supplies intercom, gen-lock, tally, return signals and DC power to a camcorder. |
| ■ | The Center Station DS-850 can be connected up to 3 camera adopters. (DS-550 can be connected to one camera adapter) |